One. Equipment name: 3D glass arc height tester

two. Device model: QC-ARH-120

three. Equipment overview:

3.1 Main specifications

Maximum detection size: 120*180 (mm)

Power supply: AC220V±5V 5A

Installed power: about 1100w

Size: 1300mm(H)*1240mm(W)*950mm(D)

Weight: about 800kg

3.2 Machine drawings

3.3 Equipment introduction

QC-ARH-120 3D glass arc height tester is an instrument used to detect 3D glass arc height.

The machine detects the height of the reference point and the arc edge through the high-precision spectral confocal displacement sensor, thereby calculating the arc height,

Through the control settings, automatically determine OK/NG. The software interface can view real-time data and the height curve of the corresponding arc,

Automatic counting and statistics production capacity. The test report can be exported at any time.

It adopts a dual-probe four-station detection method, which effectively improves the detection efficiency. The single chip efficiency is about 10s (measured at 14 points).

The number of measuring points and scanning paths are different, and the efficiency varies slightly.

3.4 Equipment structure

The gantry-type single-drive structure is adopted, with stable performance and smooth operation; all three axes use Shangyin servo modules and Panasonic servo motors to effectively ensure operation accuracy.

four. software interface

4.2 Data Report

The four-station page export can export the test data corresponding to the reference point.

Arc height data report:

Benchmark data report:

Fives. Equipment installation requirements

5.1 The power supply is well grounded;

5.2 The equipment is placed steadily and the level is adjusted;

5.3 There is no vibration in the laboratory, the air is clean and well ventilated.