1. Product use:
Single-arm drop test machine This machine is specially designed to test the damage of product packaging by falling, and to evaluate the impact strength during transportation and handling???
2. Design applicable standards:
ISO2248 JISZ0202-87 GB/T4857.5-92
Third, the introduction editor
The single-wing drop test machine can perform free drop test on the surface, corner and edge of the package. It is equipped with a digital display height display and adopts a decoder for height tracking, which can accurately give the product drop height and the preset drop height error
The difference does not exceed 2% or 10mm. This machine adopts a single-arm double-column structure, with electric reset, electric control drop and electric lifting device: easy to use; the unique hydraulic buffer device greatly improves the service life, stability and safety of the machine
Full-featured single-arm setup, which can easily place the product, and the angle error between the impact surface of the drop angle and the plane of the bottom plate is less than or equal to 5°.
Fourth, the principle of editing
The drop test machine simulates the situation of different edges, corners, and faces falling to the ground at different heights after the product is packaged, so as to understand the damage of the product and evaluate the fall height that the product packaging components can withstand when falling.
Impact resistance. In order to improve and perfect the packaging design according to the actual situation of the product and the scope of the national standard. This testing machine is designed to test various products after being packaged, and the products will be degraded during handling or transportation.
Internal damage, and in order to prevent damage in advance, you can use this machine to anticipate the test, so as to find the best solution, so as to minimize the loss during transportation, and evaluate the impact resistance of the electronic components when they are dropped during transportation.
Strength; a reliable equipment that can test the diamond, angle and surface of the packaging container.
Five, the main technical parameters:
1. Drop height? mm?: 300-1500 adjustable
2. The maximum weight of the specimen kg: 0-80Kg;
3. The thickness of the bottom plate: 10mm (solid iron plate)
4. The maximum size of the specimen mm: 800 x 800 x? 1000
5. Impact panel size mm: 1000*300=2 pieces
6. Support arm size mm: 160*250*10
7. Drop height error: ±10mm
8. Overall dimensions of the test bench mm: about 1700 x 1800 x 2315
9. Net weight kg: about 300kg;
10. Test method: face, corner and edge drop in all directions
11. Transmission mode: electric transmission
12. Drop height error: 1%
13. Parallel error of impact panel: ≤1 degree
14. The angle error between the falling surface and the horizontal during the falling process: ≤1 degree
15. Power supply: 380V1 (or 220V), power supply: AC380V 50HZ
16. Power: 1.85KWA
17. Test method: face, edge and corner drop in all directions
18. Height display; LED meter digital display
