1. The principle of the universal material tensile strength testing machine: The multifunctional material tensile strength testing machine uses a motor to drive the screw to move the fixture, and place the installed sample test fixture between the upper and lower fixtures, and then apply the specified speed. When the upper clamp stretches the sample upward, the load cell at the upper end of the upper clamp feels the tension; the force is converted into a voltage signal and output to the display. As a result, the LOAD CELL force sensor is connected to the display to automatically display the force value.

2. Purpose of universal material tensile strength testing machine:

The microcomputer multi-functional material tensile strength testing machine tests the tensile strength, tearing, peeling, bonding strength of various materials, and so on. It integrates electro-hydraulic servo automatic control, automatic measurement, data acquisition, screen display, and test result processing. It has the characteristics of good professionalism, high reliability, and easy upgrade. It can follow the development of test machine measurement and control technology and test standards. Constantly enriching and perfecting through changes.

3. The universal material tensile strength testing machine is based on the standard:

GB/T 16491, GB/T 1040, GB/T 8808, GB/T 13022, GB/T 2790, GB/T 2791, GB/T 2792, GB/T 16825, GB/T 17200, GB/T 3923.1, GB/T 528, GB/T 2611, GB/T 6344, GB/T 20310, GB/T 3690, GB/T 4944, GB/T 3686, GB/T 529, GB/T 6344, GB/T 10654, HG/T 2580, JC/T 777, QB/T 2171, HG/T 2538, CNS

11888, JIS K6854, PSTC-7, ISO 37, AS 1180.2, BS EN 1979, BS EN ISO 1421, BS EN ISO 1798, BS EN ISO 9163, DIN EN ISO 1798, GOST 18299, DIN 53357, ISO 2285, ISO 34 -1, ISO 34-2, BS 903, BS 5131, DIN EN 12803, DIN EN 12995, DIN53507-A, DIN53339, ASTM D3574, ASTM D6644, ASTM D5035, ASTM D2061, ASTM D1445, ASTM D2290, ASTM D412, ASTM D3759/D3759M

4. Technical parameters of universal material tensile strength testing machine:

1. Capacity options: 1, 2, 5, 10, 20, 25, 50, 100, 200kg (optional)

2. Unit switch: gf, kgf, N, kN, LBf, W, T optional

3. Load resolution: 1/250,000

4. Load accuracy: within ±0.05%

5. Maximum stroke: 500mm without fixture

6. Test speed: (0.1-500) mm/min (computer can be adjusted arbitrarily)

7. Dimensions: (L×W×H) 62×53×126cm

8. Displacement accuracy: ±0.5%

9. Weight: 70kg

10. Power supply: 1∮, 220V, 50Hz, 3A

11. Sensors: oil pressure sensor, photoelectric sensor, extensometer

12. Control mode: electro-hydraulic servo closed-loop control, the control mode can be switched smoothly

13. Display mode: the computer screen displays the measured values of test force, piston displacement, and sample deformation, and the screen displays the test curve. The screen zero calibration. Power system: Panasonic servo motor + Panasonic servo drive + ball screw + Taiwan Liming reducer + timing belt transmission

Software (Chinese and English can be converted) Software interface:

Main interface of standard version material test software (standard configuration)

【Attachment 1】Accessories list