Accessories configuration list: 2 sodium chloride (500G/piece), 1 5000ml meter, 6 storage glass rods, 4 V-shaped racks, one set of nozzles and limit valves, two sets of barometers and regulating valves, A copy of the manual.
Product description: The salt spray test machine is one of the "three preventions" (damp heat, salt spray, mold) test equipment for the artificial climate environment. It is used to study various environmental adaptations in machinery, national defense, light industry, electronics, light industry electronics, instrumentation and other industries. An important salt spray test equipment for performance and reliability. The salt spray test machine can be used for neutral salt spray test according to GB/T2423.17 "Basic Environmental Test Procedure Test Ka: Salt Spray Test Method for Electronic and Electrical Products", and it can also be used for acetic acid salt spray test.
Feature introduction: This salt spray test is to test the corrosion resistance of the products after coating, electroplating, anode treatment, anti-rust oil and other anti-corrosion treatments on the surface of various materials. Standards used: CNS3627, 3885, 4159, 7669, 8886, JIS D-0201, H-8502, H-8610, K-5400, Z-2371, ISO 3768, 3769, 3770, ASTM B-117, B-268, GB-T2423,
Adopting a full detection system, it can be illuminated when a fault occurs.
1. The whole set is made of PVC board, and the salt spray test machine adopts advanced three-dimensional reinforcement technology inside, which has a strong structure and never deforms. And resistant to acid and alkali
High temperature resistant and never aging
2. The automatic/manual water filling system is adopted, which can automatically/manually replenish the water level when the water level is insufficient, and the test will not be interrupted.
3. Precise glass nozzles and salt spray tester can be used for 4000 hours to ensure that there is no crystal blockage.
4. The control instruments are all on the same board, which is easy to operate and clear at a glance.
5. With double over-temperature protection, warning of insufficient water level to ensure safe use.
6. Imported temperature controller, digital display, PID control, high stability platinum temperature probe, error
7. The laboratory adopts direct steam heating method, which can increase the temperature quickly and shorten the standby time of the salt spray test machine.
8. The spray tower is equipped with a cone-shaped diffuser, which has the functions of guiding the fog, adjusting the amount of fog, and evenly falling.
9. The pressure barrel adopts Henry's law to heat and humidify, and provide the humidity required by the salt spray testing machine laboratory.
Chamber size of the test chamber: 60x40x45 (length X width X height cm);
Test outdoor box size: 107x63x118 (length X width X height
Laboratory temperature: NSS ACSS 35℃±1℃/CASS50℃±1℃;
Pressure tank temperature: NSS ACSS 47℃±1℃/CASS63℃±1℃
Salt water temperature: 35℃±1℃; Laboratory capacity: 108L; Salt water tank capacity: 15L;
Add 0.26 grams of copper chloride (CuCL2 2H2o) per liter to the concentration of 5% of sodium chloride solution or 5% of sodium chloride solution;
Spray volume: 1.0~2.0ml/80cm2/h; relative temperature of the laboratory: above 85%;
Spray method: continuous spray, programmable spray (including continuous spray and intermittent spray
Power supply: AC220V1φ
After-sales service: 1. Anyone who purchases our products will enjoy free warranty within one year and lifetime maintenance.
For on-site maintenance, debugging, training, response within 2 hours, on-site solution within 24 hours
problem.
Our service hotline: 0755-33126637/13510091016 Guo Sheng
